EN ISO IEC 17025 Accredited Laboratory

  • MET header page image one

Tensile Testers

Medical Packaging Peel Testers

The seal strength of sterile packs is investigated using either burst testing or a 'seal peel' test. The requirements are described in ASTM F88/F88M Standard Test Method for Seal Strength of Flexible Barrier Materials and ISO 11607 Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems.

MET sell leading expert Mark-10's peel testing equipment, all CE marked, and offering a very wide choice of:

Peel Test Stands

Key Features (ESM motorised test stand)
  • Maximum force: 300 lb [1.5kN]
  • Maximum travel: 11.5" [292 mm] or 18" [457mm]
  • Speed range: 0.5-13 in/min [13-330 mm/min]
  • Speed accuracy: ±2% of setting, ±0% variation with load
  • LCD display and PLC control
  • Remote control console with a 3' [1 M] cable
  • Universal power supply: 80-240 VAC
  • Manual travel knob
  • Mounting holes for bench mounting
  • Removable base plate with 25 #10-32 threaded holes for fixture mounting
  • Base may be removed for alternative mounting

Force Test Equipment to Gauge Seal Strength

Force Gauges

Mark-10 digital force gauges can be used in a virtually limitless number of tension and compression testing applications. They are able to capture the peak force and have selectable units of measurement. Available from 50g full scale to 500Kg, it is the broadest range in the industry.

Key Features (Series 5)
  • High-speed 7,000 Hz sampling rate
  • USB, RS-232, Mitutoyo and analog output
  • Large backlit graphic display
  • 1,000-point data memory with statistics (min, max, mean, standard deviation) and outputs
  • Live load bar graph with set point markers
  • Programmable set points, with alarms and outputs
  • Peak readings and set points always displayed
  • Averaging mode - calculates average readings over time
  • External trigger mode - for switch contact testing or remotely stopping display update
  • Automatic data output via USB/RS-232
  • 5 selectable units of measurement
  • Configurable audio alarms and key tones
  • Password protection, configurable for individual keys and calibration