MET medical device packaging test department provides a full suite of transit validation tests. We take you bulk packed products and subject them to either ISTA 2A or ASTM D 4169 transit simulation. This is followed by sterile barrier...

It is essential that syringe pumps and other infusion devices deliver the correct dosage to a patient. A particular requirement for devices driven by springs or elastic mechanisms is that they work predictably at different atmospheric...

Come to MET for breast implant testing to EN ISO 14607 Non-active surgical implants -- Mammary implants -- Particular requirements.

Pharmaceutical stability testing to ICH guidelines is provided by MET. ICH Q1 describes the stability / ageing regime required and testing to be carried out. MET’s laboratory service is here to support your needs. Contact us for further...

MET’s laboratory is equipped to provide the studies described in EN ISO 11070:1999 Sterile, single-use intravascular catheter introducer.

The Series 2 digital force gauges are designed for basic tension and compression force testing applications up to 100 lbF (500 N). Peak tension and compression readings are reliably captured via the gauges' ±0.5% accuracy and 500 Hz sampling...

 Design inputs and risk analysis are important components of a CE Technical File. Design inputs should be specific: a super absorbent dressing which retains x grams of fluid per hour; or a dispensing system which delivers a bolus of 3.0 ±...

This year, MET is giving to spina bifida charity Shine http://www.shinecharity.org.uk/

Sports drinks claim to be isotonic: osmolarity and electrolyte analysis provided by MET can support these product claims. Also some oral OTC products such as diarrhoea rehydration drinks are considered medical devices. MET can provide analysis...

 Laboratory analysis of product performance to CEN/TR  15821 Method for testing compression medical hosiery and EN 1644 Test for nonwoven compresses for medical use is now available from MET.